PRO AC

ProAc viene considerato da molti il miglior fabbricante di diffusori hi-end al mondo. Molti rinomati professionisti utilizzano i diffusori ProAc sia in studio di registrazione sia in ambito domestico. Se conoscete il suono ProAc sapete che tutti i diffusori prodotti da questa casa sono facilmente identificabili, grazie alle loro caratteristiche soniche comuni. Se non conoscete i diffusori ProAc ascoltateli, nessuno è mai rimasto deluso, molti hanno cambiato i propri diffusori di riferimento in favore delle creazioni di questo grande marchio inglese

Even in the short history of high-end high fidelity, few companies have lasted the course. Even fewer have consistently developed and produced high quality products which have earned international acclaim. ProAc is one such company.The ProAc range is, as they say, reassuringly expensive. We do not make cheap loudspeakers and certainly do not produce cheap sounds. Happily, many thousands of audiophiles worldwide agree with our philosophy.Every ProAc loudspeaker is hand-crafted, with our technicians individually responsible for the building and testing of each unit, from the flagship Response models to the diminutive Tablette. Build quality alone is unsurpassed, each cabinet being meticulously constructed, damped and finished in real wood veneer.Only the very finest components are used in ProAc loudspeakers, with each new model reflecting the very leading edge of audio technology. Indeed many models now incorporate dedicated driveunits using our own basket, cone and magnet assemblies. Drive unit performance is fine-tuned through expensive and sophisticated crossover networks .But all the finest cabinets and components in the world are redundant without inspired design. And for a quarter of a century Stewart Tyler, Chairman and Chief Designer has been responsible for putting it all together and producing the performance. He alone decides the cabinet size and configuration, drive unit layout and crossover design and all the other factors which combine to produce some of the most cultured sounds available in modern audio.ProAc loudspeakers are available through a network of enlightened dealers who will be pleased not only to put our models through their paces, but to give informed advice on partnering equipment. When you think you've heard the best, then go and hear ProAc.

Telefona o invia un e-mail per avere l'ultima offerta 0174 670100 Telefona o invia un e-mail per avere l'ultima offerta 0174 670100 info@newaudio.it

Tablette 10 - NOVITA' Diffusore in sospensione pneumatica da scaffale/stand a 2 vie, 5-50 watt, 10 ohm, 86dB, bi-wired. Dimensioni (LxAxP): 190,5x304,8x158,75 mm. Colori: ciliegio,frassino nero,mogano,noce,bianco quercia. Colore ebano ,palissandro 1.335,00 euro

The new ProAc Tablette 10 is a tenth generation of the Tablettes launched in 1979. The Tablette 10 is an all new design, using a thin walled heavy damped infinite baffle enclosure which is the same as the BBC LS3/5a. This design allows the Tablette 10 to be positioned against the wall, unlike a ported enclosure (not recommended). The new Tablette 10 has cutting edge new drive units, the bass driver has a Paginna Mika cone which is reed leaves mixed with Mika and coated with an acoustic dope. The crossover has been specially designed for a sealed enclosure with a network which shapes the response to give a rich bass and an extremely transparent midrange. The tweeter is our well known 1 inch silk dome used in many of ProAc's other models. During the design several speakers were used as comparison those being the LS3/5a, ProAc D2, Spender BC1 and Quad Esl 57. We urge people to listen and compare with other makes and models as we are sure you will find the music intoxicating. The Tablette 10 Specifications Nominal Impedance 10 ohms Recommended Amplifiers 5 to 50 watts Sensitivity 86 dB linear for 1 watt at 1 metre Bass Driver ProAc 5" with Paganni Mika cone, with acoustic coat. Crossover Finest components on dedicated circuit board. Multistrand oxygen free copper cable throughout. Split for optional Bi Wiring or Bi Amplification. Dimensions Height: 12" (304.80mm), Width: 7" 1/2 (190.50mm), Depth: 6" 1/4 (158.75mm) including grille Mode Stand/Shelf mounting Grille Acoustically transparent crimplene Finish Standard Finishes: Black Ash, Mahogany, Cherry, Maple, Silk White. Premium Finishes: Rosewood, Ebony. *Premium Finishes to order at extra cost

Diffusore in sospensione pneumatica da scaffale/stand a 2 vie, 5-50 watt, 10 ohm, 55hz-30kHz, 86dB, bi-wired, woofer ProAc con sistema magnetico e parapolvere in rame. Dimensioni (LxAxP): 190,5x304,8x158,75 mm. Peso 11 kg.Colori: ciliegio,frassino nero,mogano,noce,bianco quercia. Colore ebano ,palissandro 1.622,00 euro

Following the successful launch of the ProAc Tablette 10 we have been developing a Tablette 10 Signature version. It has taken a great deal of time to design a new bass driver with Excel magnet system and our own solid copper phase plug. The result is a bass driver with the Tablette 10 cone material and our special copper magnet system. During the design of the Tablette 10 the LS3/5A, along with other mini monitors, were compared to the Tablette 10 and in our opinion the Tablette 10 had lower colouration. The Tablette 10 Signature shares the attributes of the Tablette 10 but has a larger more projected mid-range giving excellent sound stage with a feeling of size which, is often missing in small loudspeakers. A great deal of time was spent fine tuning the crossover to get the best from our new bass driver. Many months of measuring and listening were taken by Stewart Tyler, the designer of both Tablette 10 and Tablette 10 Signature. The end result is a speaker similar to the Tablette 10 in sound but, on certain types of music and voice reproduction, advantages of the signature can be quite easily heard. Tablette 10 Signature can be used with its back against the wall and on good quality stands.Specifications Nominal Impedance 10 ohms Recommended Amplifiers 5 to 50 watts Frequency Response 55Hz - 30kHz Sensitivity 86 dB linear for 1 watt at 1 metre Bass/Midrange ProAc 5 inch with Paganni Mika cone, with acoustic coating and copper excel magnet system with solid copper phase plug. Tweeter 1 inch (25mm) ProAc silk dome air cooled and inner damping. Crossover Finest components on dedicated circuit board. Multistrand oxygen free copper cable throughout. Split for optional Bi Wiring or Bi Amplification. Dimensions Height: 12" (305mm), Width: 7" 1/2 (191mm), Depth: 6" 1/4 (159mm) Weight 24lb (11kg) a pair Mode Stand mounting recommended. Can be shelf mounted if necessary Grille Acoustically transparent crimplene Finish Standard Finishes: Black Ash, Mahogany, Cherry, Maple, Silk White, Natural Oak and Walnut. Premium Finishes: Rosewood, Ebony.

Telefona o invia un e-mail per avere l'ultima offerta 0174 670100 Telefona o invia un e-mail per avere l'ultima offerta 0174 670100 info@newaudio.it

Dopo un successo internazionale durato ben vent'anni, Stewart Tyler presenta Studio SM 100, successore del celebre modello Studio 100, apprezzato universalmente come diffusore near field monitor negli studi di registrazione e come ottimo interprete musicale nel salotto di casa da moltissimi celebri artisti e operatori dell'industria discografica, oltre che da appassionati dell'Alta Fedeltà. Progettato per ben due anni direttamente dalla mente creativa di ProAc, il designer Stewart Tyler, il nuovo diffusore da stand Studio SM 100 presenta una componentistica migliorata puntando alle medesime sonorità del modello Studio 100, ma offrendo una minore distorsione grazie al nuovo tweeter, una maggior tenuta in potenza e una maggior longevità del woofer, complessivamente restituendo un suono leggermente più morbido che permette un ascolto mai affaticante per lunghe sessioni di utilizzo.Diffusore bass reflex da scaffale a 2 vie, 30-150 watt, 8 ohm, 35hz-30khz, 88dB, bi-wired, magneti schermati. Il successore dell'acclamato modello Studio 100. Dimensioni (LxAxP): 203x406x254 mm. Peso:12 kg cadauna. Finitura ciliegio

The ProAc studio 100 was produced for over 20 years until 2013. They were made for both domestic and studio use. The studio 100 quickly became a favourite in the studios used as a near field monitor For the last 2 years Stewart Tyler has been working on a new speaker named the ProAc SM100 and all parameters have been improved for both studio and domestic use. It now has a new bass driver with a new surround and dust cap along with a brand new 1 inch domed tweeter and crossover network, however the cabinet remains the same.
The bass driver looks similar but has a new rubber surround for longevity and power handling and now comes in a ProAc basket. The tweeter is a new ProAc design with a 1 inch silk dome and a front plate to lower distortion, the dome has a new roll surround. MThe SM100 also features a new crossover, the overall sound quality is similar to the studio 100 but slightly smoother sound makes it ideal for long listening sessions. MFor further details contact ProAc via our website or ProAc dealer direct.

Il progettista Stewart Tyler rinnova la gamma dei diffusori della serie Studio dando vita al diffusore ProAc Studio 115, il successore di Studio 110, uno dei diffusori ProAc di maggior successo.Seguendo le orme del predecessore, il nuovo diffusore Studio 115 si presenta come un diffusore compatto dalle prestazioni elevatissime, con un rapporto qualità prezzo che lo pone seriamente in rilievo sull'offerta di mercato, e dotato del caratteristico suono ProAc presente in ogni diffusore creato dalla mente del progettista inglese.Studio 115 rivede completamente la componentistica; il nuovo mid-woofer è il medesimo altoparlante da 165mm utilizzato nei diffusori da pavimento ProAc Studio 140 MkII, il tweeter è un nuovissimo progetto ProAc a cupola morbida da 20mm. Il mobile del diffusore è stato snellito e acquisisce ulteriore rigidità per ridurre le riflessioni del frontale, e presenta il condotto del tubo d'accordo posizionato centralmente per ottimizzare l'emissione delle basse frequenze. Il crossover è un progetto ex novo che impiega esclusivamente componenti di prim'ordine. I morsetti sui terminali sono ora i medesimi impiegati sulla serie superiore Response. Studio 115 Diffusore bass reflex da scaffale/stand a 2 vie, 15-150 watt, 8 ohm, 30hz-30khz, 88,5dB, bi-wired, magneti schermati. Dimensioni (LxAxP): 190x380x240 mm. cadauna Peso: 8,9 kg.

ProAc proudly announce the launch of the Studio 115 all new compact monitor. The cabinet, drive units, crossover and terminals have all been upgraded from the previous model, the Studio 110 and a narrower cabinet front baffle has been utilised to aid dispersion and produce a bigger soundstage. The cabinet features bitumous damping and the port tube for bass loading is now centrally located on the front baffle with the new bass driver. The new bass driver is manufactured from carbon filled polyproalene; A material which gives all the inherent advantages of cone stiffness such as a lucid bass quality and natural, detailed presentation. It is also an ideal material with which to minimise distortion characteristics and has contributed significantly to the success of the Studio 140 Mk 2. The bass driver crosses over to a brand new tweeter developed by ProAc which has a special dome with air-cooling. The crossover network components have been upgraded to seamlessly integrate the new drivers.The Studio 115 is designed to work with all levels of quality equipment, from a modest set-up to a true high-end system, producing highly musical results in the true ProAc compact monitor tradition.

Telefona o invia un e-mail per avere l'ultima offerta 0174 670100 Telefona o invia un e-mail per avere l'ultima offerta 0174 670100 info@newaudio.it

Diffusore bass reflex da scaffale a 2 vie, 20-100 wa tt, 8 ohm, 38-30khz, 88,5dB, bi-wired Dimensioni (LxAxP): 182x320x280 mm. Peso 8,8 kg Colori: ciliegio,frassino nero,mogano,noce,bianco quercia. Colore ebano ,palissandro 1.885,00 euro

Per molto tempo il modello Response è stato uno dei mini-monitor più diffusi al mondo, ma oggi il RESPONCE ONE gli ha 'rubato il trono'. Significativi miglioramenti ad alta tecnologia sono stati effettuati al driver dei bassi, nel mobile e sul crossover. Il baffle del mobile è più sottile per aiutare la dispersione, e ora è dotato di uno speciale materiale smorzante che rende il mobile molto robusto e inerte. L'altoparlante dei bassi completamente nuovo risiede ora su uno chassis ProAc, che ha una struttura a ragno rialzata e un materiale del cono simile a quello utilizzato nel diffusore D2. Esso incorpora il sistema di magnete EXCEL e una presa acrilica a smorzamento di fase. Ulteriori miglioramenti sono stati effettuati al crossover. I risultati sono un basso più d'impatto, toni medi più aperti e ricchi, frequenze alte più dettagliate. Il D1 è anche più efficiente di ben 1,5 dB rispetto all'1SC rendendolo più facile da pilotare anche disponendo di un amplificatore con ridotta potenza d'uscita. Specifiche Impedenza: 8 ohm Amplificazione: da 20 to 100 watt Risposta in frequenza: da 38Hz a 30kHz Sensibilità: 87,5 db lineari / 1 watt / 1 metro Mediobassi: altoparlante da 130mm ProAc con cono in fibra di vetro intrecciata, struttura a ragno rialzata, magnete sistema Excel e presa acrilica a smorzamento di fase, chassis assemblato a motore lineare, magnete in rame e presa di fase. Materiale del cono esclusivo ProAc Alti: altoparlante a cupola da 3/4, bobina a nido d'ape con smorzamento speciale raffreddato a ferrofluido. Crossover: vengono utilizzati i migliori componenti assemblati su una scheda dedicata dotata di cablaggio multistrand in rame privo di ossigeno. Bi-wiring e bi-amping opzionali.Dimensioni (LxAxP): 168x305x260mm (la profondità include la griglia spessa 12mm) Peso: 9kg Utilizzo: su stand Griglia: crimplene trasparente Finitura: impiallicciature in vero legno cadauna Colori: ciliegio,frassino nero,mogano,noce,bianco quercia. Colore ebano ,palissandro 2.432,00 euro

For many years the Response 1SC has been one of the world’s leading mini monitors but now the D1 has stolen its crown. High tech improvements have been made to the cabinet, bass driver, and crossover network.he cabinet baffle is slimmer to aid dispersion, and now has a special damping material making the cabinet very heavy and inert.The all-new bass driver is now on a ProAc chassis, this has a raised spider and similar cone material to the D2. It also features the EXCEL magnet system and a new acrylic damping phase plug.Further improvements have been made to the crossover network. The results are a punchier bass, richer more open midrange, with sweet and detailed high frequencies. The D1 is also 1.5 dB more efficient than the 1SC making it easier to drive for those who have amplifiers with a lower output.Technical Info Close window Taking miniature loudspeaker performance to new heights Nominal Impedance 8 ohms Recommended Amplifiers 20 to 100 watts Frequency Response 38Hz to 30kHz Sensitivity 87.5 db linear for 1 watt at 1 metre Cabinet Heavy, inert construction damped with special material and featuring slim, rigid front baffle design to aid dispersion. Bass/Midrange Driver New 5" (130mm) ProAc unit featuring glass fibre weave cone, raised spider assembly, EXCEL magnet system and unique acrylic damping phase plug. Tweeter ProAc ¾ dome unit with honeycomb wound voice coil, special damping and ferrofluid-cooled coil assembly. Crossover Finest components on dedicated circuit board with multistrand oxygen-free copper cable throughout. Split for optional bi-wiring/bi-amping. Dimensions 12" (305mm) high 6 5/8" (168mm) wide 10 1/4" (260mm) deep including grille thickness of 12mm Weight 20lbs (9 Kgs) Mode Stand mounted Grille Acoustically transparent crimplene Finish ,Finish Available in the following real wood veneers: Black Ash, Mahogany, Cherry, and Maple. Ebony to order at extra cost. * Due to our policy of continuous improvement specifications are subject to change without notice.

Response D Two Diffusore bass reflex da scaffale a 2 vie, 20-150 watt, 8 ohm, 30hz-30khz, 88,5dB, biwired. Dimensioni (LxAxP in mm): 203x430x260. Altezza punte incluse. cadauna Colori: ciliegio,frassino nero,mogano,noce,bianco quercia. Colore ebano ,palissandro 2.842,00 euro

ProAc loudspeakers have a reputation for exceptional sound and build quality. Our enclosures may look conventional but this hides the advanced technology required to build a rigid and well-damped cabinet. Our loudspeakers are made in our factory at Brackley, England. They are slim and elegant, finished in gorgeous real wood veneer.With first class sound quality, you’ll be listening to ProAc speakers long after you would have become tired of a fashionable but poor sounding alternative. We are renowned for producing compact high-end speakers evidenced by both Tablette and Response 1SC which have become iconic over the years.The Response D TWO is a new speaker in this fine tradition, designed for the finest quality music and giving true monitor performance. The cabinet is made from a heavily damped, thin-wall rigid birch ply carcass, with a 25mm back panel. The bass driver is new, using the same cone technology as the Response D15 but with a revised coil and magnet. The tweeter is the same 1" silk dome as used in other ProAc models and the drive units are seamlessly mated with an HQ network designed and built by ProAc. Sound quality from the D TWO is one of extreme transparency; a lush and potent bass response and a silky detailed high frequency. The D TWO also have a huge sound stage with pinpoint imagery. The speakers are designed to sit on high mass stands from 18" high depending on your seating position.

Diffusore bass reflex da scaffale a 2 vie, 20-150 watt, 8 ohm, 30hz-30khz, 88,5dB, bi- wired Dimensioni (LxAxP): 203x430x260 mm. Peso: 11 kg.Colore ebano ,palissandro 3.242,00 euro

Diffusore bass reflex da pavimento a 2 vie, 20-180 watt, 4 ohm, 38hz-30khz, 90db, bi-wired, tweeter a cupola Dimensioni (LxAxP): 193x978x229 mm (punte incluse). Peso: 26 kg. DT8 Colori: ciliegio,frassino nero,mogano,noce,bianco quercia.

ProAc invests a great deal of time researching the choice of diaphragm material for their drive units because this is the most important component, transferring cone movement into sound. Some materials excel at certain frequencies and therefore it would prove logical to use more than one type of drive unit material to cover all frequencies. Additionally, all production parts from the chassis through to the magnet system, spider and voice coil are painstakingly selected. The latest ProAc floor standing design, the new Response DT8, incorporates these design parameters for the first time in a ProAc two-way design. Utilising 2 x 6.5 inch drivers, the pulp mica cone unit delivers exceptional bass performance in a ported cabinet with the bass loaded via side vents and the polypropylene unit gives a smooth, detailed and uncoloured midrange. Both drivers work in tandem resulting in a well extended low frequency response and ProAc's signature natural sounding midrange quality and pinpoint imagery. These frequency ranges are then cleverly overlapped by a new, Stewart Tyler designed, crossover which seamlessly integrates ProAc's proven 1 inch soft dome tweeter, offset on the front baffle, and placed between the 2 drivers. Some other manufacturers frequently use the same drive unit cone material in each of the models in their range. ProAc has taken a different approach and has previously used carbon fibre, kevlar, pulp and polypropylene. However this is the first time we have used two different types of unit in a two-way design. The new Response DT8 now takes its place in the ProAc range as our entry level floor standing design. We believe that this innovative new loudspeaker will create new interest in the mixing and matching of drive unit cone materials to effectively cover all types of music.Specifications Nominal Impedance 4 ohms Recommended Amplifiers 20 to 180 watts Frequency Response 28Hz to 30kHz Sensitivity 90 db linear for 1 watt at 1 metre Bass/Midrange 2 x 6.5" (165mm) bass/ mid units. One driver with pulpmica cone and open weave dust cap and one driver with polypropylene cone with soft polypropylene dust cap. Both units working in tandem. Tweeter ProAc 1" (25mm) silk dome tweeter Crossover Specially designed crossover to accommodate two different types of bass/ mid cones. Glass fibre board with finest components using multistrand copper wire designed for use with both Biamping and Bi-wiring. Dimensions 38.5" (978mm) high (on spikes), 7.6" (193mm) wide, 9" (229mm) deep Weight 55lbs (26Kgs) each Mode Floor Standing Grille Acoustically transparent crimplene Finish Standard Finishes: Black Ash, Mahogany, Cherry, Maple and Oak Premium Finishes: Rosewood, Ebony.

Response D 20 - Diffusore bass reflex da pavimento a 2 vie, 20-180 watt, 8 ohm, 28hz-33khz, 88,5db, bi-wired, tweeter a cupola Dimensioni (LxAxP): 190x960x227 mm (punte incluse). Peso: 26 kg.Colori: ciliegio,frassino nero,mogano,noce,bianco quercia. Colore ebano ,palissandro 3.482,00 euro

ProAc Response D20R speakers In order to satisfy demand for Ribbon loaded tweeter speakers ProAc are introducing the brand new Response D20R. The New model takes lot from current ProAc range, most notably the same midrange/bass driver you find in the critically acclaimed D18's and the same Bass loading system you find in the bigger D30R's to offer a powerful bass response with good extension and low colouration. The crossover network features audiophile grade components to accurately merge the ribbon tweeter and bass/ midrange unit together seamlessly, whilst never getting in the way of the music. Bass loading by the cabinet has been improved over the D18 to give a solid bass delivery, to create incredibly lifelike sound stage. This combination offers a light, airy and detailed high frequency response but with a powerful bass extension and clear natural midrange to satisfy even the most critical ear. A selection of beautiful real wood veneers enable the D20R's to look just as good as they sound.Frequency Response 28Hz to 33KHz Sensitivity 88.5 dB linear for 1 watt at 1 metre Bass Midrange driver 6.5" (165mm) ProAc unit fitted features glass fibre weave cone, Excel Magnet system and unique acrylic damping phase plug. Ribbon tweeter ProAc ribbon 60mm by 10 mm as light as a human hair, with rear chamber damping. Crossover network Audiophile components on dedicated circuit board. Multi-strand oxygen free copper cable throughout. Split for optional bi-wiring or bi-amplification Recommended amplifier power 20 to 180 watts Impedance 8Ω Weight 26kg each Dimensions Height: 38.4" (960mm) plus Spikes Width: 7.6" (190mm) Depth: 9.1" (227mm)

Diffusore bass reflex da pavimento a 2 vie, 10-200 watt, 8 ohm, 20hz-30khz, 89dB, bi-wired. Dimensioni (LxAxP in mm): 215x1041x266. Altezza punte incluse. Colori: ciliegio,frassino nero,mogano,noce,bianco quercia. Colore ebano ,palissandro 5.672,00 euro

ProAc has recently implemented the use of carbon fibre in the cones of the Response D40 and Carbon Pro 8, and Kevlar in the Tablette Anniversary and K6 models, thereby achieving levels of sound quality that were only dreamed of a few years ago. The necessary exhaustive research involved in the development of these models and the materials employed, has enabled us to design cones that give excellent frequency response characteristics and the new Response D30 is the latest model to take advantage of the acoustic excellence of carbon fibre. The Response D30 floorstander utilises a new polymer rear coated carbon fibre coned bass driver mounted in a slim enclosure. Bass loading is achieved by side vented directional loading similar to that used in the D40, producing an extremely accurate and powerful bass response with good extension and low colouration. The D30 is available in both ribbon and dome tweeter configurations and features the same high quality HF units found in the D40/D40R. The crossover network employs dedicated components of the highest quality and multi strand oxygen free copper wiring. The classic ProAc split crossover design offers bi-wiring and bi-amping options. The D30 therefore offers a similar bass loading, cone material, tweeter and crossover network to that of its larger sibling, making it an ideal choice for those who require a smaller floorstander, but still demand sonic excellence.Once set up using our own spikes, which are designed to penetrate even thick carpet and when partnered with quality electronics, the exceptional performance of the D30 can be fully realised. Offering clean powerful bass, an uncoloured, open midrange and a sweet, detailed high frequency response from either the ribbon or dome tweeter, the Stewart Tyler designed D30 offers a wonderfully natural and musical performance with pinpoint imagery that will appeal to audiophiles and music lovers all over the world.

Diffusore bass reflex da pavimento a 2 vie, 10-200 watt, 8 ohm, 20hz-30khz, 89dB, bi-wired. Tweeter a nastro. Dimensioni (LxAxP in mm): 215x1041x266. Altezza punte incluse.Colori: ciliegio,frassino nero,mogano,noce,bianco quercia. Colore ebano ,palissandro 5.672,00 euro

Response D 48 - Diffusore bass reflex da pavimento a 2 vie, 10-250 watt, 8 ohm, 20hz-30khz, 90db, bi-wired. Dimensioni (LxAxP): 212x1.200x349 mm (punte incluse). Peso: 39 kg.Colori: ciliegio,frassino nero,mogano,noce,bianco quercia.

After a year in research and development the D48 is now ready for production. Areas of improvement have been mid-range detail and a cleaner, faster and more extended bass response. A new studio monitor quality bass driver was designed for the D48. It features a special impregnated cone and mid frequencies are tuned by a cap of greater size than standard. This gives the new unit greater mid-range detail along with excellent bass control giving a tighter and more extended response. The two new bass drivers are each loaded through our special floor loading with side vents, this makes the loudspeaker easier to sight and reacts less to surroundings. The two bass units are then seamlessly mated to our ribbon or dome tweeter depending on your preference. With such a large slim floor standing design the sound stage is superb being very large and with pinpoint imagery. Another achievement for the D48 is its ability to create large orchestral works as well as heavy rock music. The D48 has a high quality filter network designed by Stewart Tyler comprising of the finest components, ProAc cable on a special board. The filter is also split for bi-amping and bi-wiring. This is one of the best designs from ProAc and should please all audio files regardless of their taste in music. Specifications Nominal Impedance 4 ohms Recommended Amplifiers10 to 250 Watts Frequency Response 20Hz to 30Khz Sensitivity 90 dB linear for 1 Watt at 1 metre Bass/Midrange 2 x 6 1/2 inch (165mm) ProAc unit studio monitor design with special coating and dust cap tuning. Tweeter Tweeter D48R - ProAc ribbon 60mm x 10mm 'light as a human hair' with rear chamber damping. Tweeter D48 - ProAc 1 inch (25 mm) soft dome with special surround and inner damping. Crossover HQC using dedicated components wired throughout with ProAc multistrand oxygen-free copper cable. Split for optional bi-wiring/bi-ampingDimensions 47 1/4 inch (1200mm) high on plinths with spikes 8 1/3 inch (212mm) wide 13 1/2 inch (340mm) deep Weight86 lbs (39 Kgs) eachMode Floor standing Grille Acoustically transparent crimplene Finish Standard Finishes: Black Ash, Mahogany, Cherry, Maple. Premium Finishes: Rosewood, Ebony.

Response D 48 Ribbon - Diffusore bass reflex da pavimento a 2 vie, 10-250 watt, 8 ohm, 20hz-30khz, 90db, bi-wired, tweeter a nastro. Dimensioni (LxAxP): 212x1.200x349 mm (punte incluse). Peso: 39 kg.Colori: ciliegio,frassino nero,mogano,noce,bianco quercia. Colore ebano ,palissandro 7.390,00 euro

K1
Diffusore bass reflex da stand a 2 vie, 10-150 watt, 8 ohm, 28hz-30khz, 90db, biwired, tweeter a nastroDiffusore da stand. Dimensioni (LxAxP): np. Peso: np.Colore ebano ,palissandro 6.275,00 euro

Diffusore bass reflex da pavimento a 2 vie, 10-250 watt, 4 ohm, 25hz-30khz, 89db, bi-wired, tweeter a nastro. Dimensioni (LxAxP): 215x1.073x340 mm (punte incluse). Peso: 42 kg. Colori: ciliegio,frassino nero,mogano,noce,bianco quercia.

The K series range of speakers are called so because of the use of Kevlar in the construction of the drive units. So far we have only used Kevlar and Carbon Fibre for bass and lower midrange reproduction in large enclosures. These cones have a light, stiff quality, the Kevlar has more warmth making excellent bass transients and extension. Cone material is something that ProAc have been developing over the last fifteen years with an emphasis on Carbon fibre and Kevlar. A new Kevlar cone was developed which would work into the midrange far better than previous Carbon fibre or Kevlar cones, this also has the added benefit of a phase plug giving better detail and dispersion. The new Kevlar drive unit was developed for the K3 and has excellent weight to the bass as well as good extension with a detailed and uncoloured midrange. This new Kevlar unit would go into a new speaker called the K3, two of these units are used with our ribbon tweeter placed centrally in our K constructed cabinet. A high quality crossover was specially designed for the K3 to seamlessly mate with the ribbon tweeter and this new crossover uses high quality components split for bi-amping and bi-wiring and connected directly to the terminals. As far as sound quality goes the K3 has a wonderfully electrostatic type of midrange very clear and detailed, with a dynamic bass response. We are sure the K3 will give customers who desire music from full orchestral to loud rock the desired results with ease. Specifications Nominal Impedance 4 ohms Recommended Amplifiers 10-250W Frequency Response 25Hz-30KHz Sensitivity 89 dB linear for 1 watt at 1 metre Bass/Midrange 2x 6.5 special bass/midrange drive unit with Kevlar cone and phase plug. Tweeter ProAc ribbon with diaphragm as light as a human hair, alnico magnet and rear chamber damping. Crossover Finest components on dedicated dual layer circuit board. ProAc multistrand oxygen free copper cable throughout. Split for optional Bi Wiring or Bi Amplification. Dimensions Cabinet Height: 42 1/4 inches (1073mm) Width: 8.5 inches (215mm) Depth: 13.5 inches (340mm) Weight Weight 42kgs (93.5lbs) each cabinet (not packed) total packed weight per pair 88Kg (194lbs) Mode Floor standing Grille Acoustically transparent crimplene Finish Standard Finishes: Black Ash, Mahogany, Cherry, Oak, Silk White, Natural Oak and Walnut Premium Finishes: Rosewood, Ebony.

Diffusore bass reflex da pavimento a 3 vie,10-250 watt, 4 ohm, 25hz-30khz, 90dB, biwired. Dimensioni (LxAxP in mm): 125x1185x340. Altezza punte incluse. Colori: ciliegio,frassino nero,mogano,noce,bianco quercia.

ProAc is proud to announce the launch of the K6 loudspeaker. Following the successful incorporation of carbon fibre cone technology in the Carbon Pro Series, ProAc have been researching other materials for possible inclusion in their high end loudspeakers. The results of this research have come to fruition in the shape of the new K series which utilises cones manufactured from the material, Kevlar. Kevlar benefits from having similar properties to carbon fibre, being light and at the same time rigid. The ProAc 6 1/2" drivers utilised in the K6 feature Kevlar cones made by the same special method as our carbon fibre coned drive units; the cone is painstakingly produced from a mould by hand, a labour intensive process taking many hours to complete. Although Kevlar has proven to be an excellent cone material sonically, the Kevlar ProAc bass drivers require a different porting mechanism in order to realise their full potential. The bass is loaded by an almost invisible vent to produce a wonderfully weighty but exceptionally fast bass response. These drivers are seamlessly crossed over to a 2" dome midrange, the horn of which is manufactured from billet aluminium and for the high frequencies, ProAc's proven ribbon tweeter has been chosen. The cabinet on the K6 is a traditional mixture from ProAc of HDF materials of different thicknesses heavily damped with bitumen. Indeed the carcass including bitumen is 35mm thick. The combination of research into carbon fibre and its ingredients have produced a stunningly accurate and detailed loudspeaker, having an electrostatic or panel quality without the drawbacks. Sound is reproduced effortlessly with incredible detail and pinpoint imagery, which often can be muddled by conventional drive units.The K6 is designed for audiophiles and music lovers who are looking for a true high end loudspeaker offering smooth reproduction and an impressively flat response throughout the frequency range. The legendary ProAc qualities of large soundstaging and pin-sharp imaging capabilities complete a highly musical and engaging transducer. Specifications Nominal Impedance 4 ohms Recommended Amplifiers10 to 250 Watts Frequency Response 25hz to 30KhzSensitivity 90 dB linear for 1 watt at 1 metreBass Driver 2 x 6 1/2" (165mm) studio professional drive units with polymer impregnated Kevlar cones and Zinc basket Midrange Driver 2" (50mm) soft dome with 6061 Aluminium Alloy Front Plate Tweeter ProAc ribbon with diaphragm 'as light as a human hair' alnico magnet and rear chamber damping and 6061 Aluminium Alloy Front Plate Crossover Finest components on dedicated dual layer circuit board; ProAc multistrand oxygen-free copper cable throughout; Split for optional bi-wiring and bi-amping Dimensions 46" high (1185mm) with spikes and plinths, 8 1/2" (215mm) wide, 13 1/2" (340mm) deep Weight 97 lbs (44 Kgs) each Mode Floorstanding on spikesGrille Acoustically transparent crimplene Finish Standard Finishes: Black Ash, Mahogany, Cherry, Maple. Premium Finishes: Rosewood, Ebony.

K6 Signature Diffusore bass reflex da pavimento a 3 vie, 10-250 watt, 4 ohm, 25hz-30khz, 90db, bi-wired, tweeter a nastro. Dimensioni (LxAxP): 215x1.185x340 mm (punte incluse). Peso: 44 kg

K10 Diffusore bass reflex da pavimento a 3 vie, 10-500 watt, 4 ohm, 20hz-30khz, 91,5db, bi-wired, tweeter a nastro. Dimensioni (LxAxP): 297x1.499x457 mm. Peso: np

Telefona o invia un e-mail per avere l'ultima offerta 0174 670100 Telefona o invia un e-mail per avere l'ultima offerta 0174 670100 info@newaudio.it

Diffusore bassreflex canale centrale a 2 vie, 10-100 watt, 4 ohm, 88dB, bi- wired, magneti schermati. Dimensioni (LxAxP): 431,8x190,5x203,2 mm. Colori: ciliegio,frassino nero,mogano,noce,bianco quercia. Colore ebano ,palissandro 2.005,00 euro

Telefona o invia un e-mail per avere l'ultima offerta 0174 670100 Telefona o invia un e-mail per avere l'ultima offerta 0174 670100 info@newaudio.it

Per ordinare o avere gli ultimi prezzi aggiornati telefona al 0174 670100 o invia un E-mail a info@newaudio.it

*I prezzi indicati sono di listino ufficiale delle case produttrici ,nel caso di diffusori si riferisce al prezzo del singolo diffusore per offerte ed eventuali promozioni telefonare o inviare e-mail.

*Il presente listino sostituisce ed annulla ogni precedente. Le caratteristiche e i prezzi indicati possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riportati.

*Tutti i marchi citati nel presente listino sono di proprietà e registrati alle rispettive Case Produttrici

Telefona o invia un e-mail per avere l'ultima offerta 0174 670100 Telefona o invia un e-mail per avere l'ultima offerta 0174 670100 info@newaudio.it