|
  
.gif)
ATACAMA NEXXUS
Essential
Colore
Nero
€. 200,00
Colore Diamante
€. 225,00
Stand per diffusori (max 15kg l'uno) con punte e
gel pad, riempibile con Atabites standard (max 16,7kg) per aumentare la
stabilità e la massa. Top (LxP): 130x170mm, base (LxP): 260x365mm, altezza
600mm. Top opzionali (LxP): 160x220mm, 140x210mm, 180x150mm e 190x305mm.
Versione HiFi Audio consigliata per le migliori prestazioni soniche, versione
Pro Studio consigliata per l'utilizzo professionale e l'home theater
Introducing the Award Winning* NeXXus 600
Essential Speaker Stands- Satin Black Finish (Pair) Bringing value and
adaptability to speaker stand design, the NeXXus 600 Essential specification is
the first of the new NeXXus series. Supplied in pairs, each individual stand is
equipped with twin 50.8mm (2”) wide support tubes and a new 5mm thick laser cut
“shield” design base plate along with a 130mm x 170mm top plate as standard. If
this sized top plate is not a suitable match for the supported speakers, a
choice of *4 alternative sized top plates packs can be purchased separately if
required. With double the mass loading capacity of the outgoing Nexus stand, the
NeXXus 600 can support speakers up to 15kg each which is a significant
improvement over the previous generation 8.4kg capacity. The bigger base plate
also allows more substantial speakers to be supported safely and securely. The
spike interface has also been updated With NeXXus featuring 8mm BZP spikes.
Atacama NeXXus series speaker stands are made in the UK. Maximum Atabite
capacity16.8Kg per pair (2 x 7kg tubs sufficient for most applications). Colour
option- Satin Black. Dimensions Standard Top plate (Width, Depth) 130mm (5.11”)
x 170mm (6.69”) Base Plate (Width, Depth) 260mm (10.2”) x 365mm (14.37”) Overall
height 620mm (24.4”) (inclusive of floor spikes) Weight capacity (per stand)
15kg (33.06 lbs) Optional Top plate pack dimensions (Width/Depth) 160mm x 220mm
(6.29” x 8.66”) 140mm x 210mm (5.5” x 8.26”) 180mm x 150mm (7.08” x 5.9”) 190mm
x 305mm (7.48” x 12”) Spike shoes- 2 x packs of Atacama HD-S spike shoes should
be used if the stands are being placed on a delicate floor covering. Mass
Loading Plate pack- This pack is compatible with NeXXus Series. GEL PADS- Nexus
Essential Specification come with domed gel pads.
.gif)
ATACAMA NEXXUS
Hifi
Colore
Nero
€. 275,00
Colore Diamante
€. 300,00*
Stand per diffusori (max 15kg l'uno) con punte e
gel pad, riempibile con Atabites standard (max 16,7kg) per aumentare la
stabilità e la massa. Top (LxP): 130x170mm, base (LxP): 260x365mm, altezza
600mm. Top opzionali (LxP): 160x220mm, 140x210mm, 180x150mm e 190x305mm.
Versione HiFi Audio consigliata per le migliori prestazioni soniche, versione
Pro Studio consigliata per l'utilizzo professionale e l'home theater
*Top Plate 160x220mm oppure 140x210mm
+49,00 euro
Designed
to support mid to high end speakers, The NeXXus HiFi Audio version of the Award
Winning* NeXXus Series speaker stands features 76.2mm (3”) front tubes,
replacing the 50.8mm (2”) front tubes used on the Essential version. This
upgrade allows a significant increase of mass loading and improved stability to
the speaker stand design, making the NeXXus 600 HiFi Audio specification an
ideal choice for the serious music lover. As an example, by opting for the
NeXXus 600 HiFi Audio specification, the maximum amount of Atabite filler has
increased to 29.65kg (65.25 lbs) compared to the NeXXus 600 Essential version,
rated at 16.8Kg (37 lbs). Supplied in pairs, each individual stand is equipped
with one 50.8mm (2”) tube, a 76.2mm tube and the new 5mm thick laser cut
“shield” design base plate along with a 130mm wide x 170mm deep top plate as
standard. If this sized top plate is not a suitable match for the supported
speakers, a choice of *four alternative sized top plates packs are available and
can be purchased separately if required. The increase in mass and stability also
allows an increased weight capacity to be supported on each stand, up from
Essentials 15kg (33.06 lbs) to Hifi Audio’s 22.5kg (49.6 lbs). The spike
interface features our biggest adjustable 8mm BZP spikes. (Previous model Nexus
used 6mm spikes).Colour options- Satin Black or Diamond white. Dimensions
Standard Top plate (Width, Depth) 130mm (5.11”) x 170mm (6.69”) Base Plate (Width,
Depth) 260mm (10.2”) x 365mm (14.37”) Overall height 620mm (24.4”) (inclusive of
floor spikes) Weight capacity (per stand) 22.5kg (49.06 lbs) Approximate maximum
Atabite mass loading filler capacity (620mm high version) is 29.65kg (65.25 lbs)
per pair. Optional (Purchase separately) Top plate pack dimensions (Width/Depth)
160mm x 220mm (6.29” x 8.66”) 140mm x 210mm (5.5” x 8.26”) M180mm x 150mm (7.08”
x 5.9”) 190mm x 305mm (7.48” x 12”) Spike shoes- 2 x packs of Atacama HD-L spike
shoes are recommended if the stands are being placed on a delicate floor
covering. Mass Loading Plate pack- This pack is compatible with NeXXus Series.
Gel Pads- NeXXus HiFi Audio Specification are supplied with domed gel pads.
Atabite Mass loading filler- For NeXXus 600 HiFi Audio, three to four 7kg tubs
of Atabites per pair of stands will be sufficient for most applications. The
exact amount to use is room, system, and personal choice dependent. See Atabite
product listing for more details. *Note- The 130mm x 170mm top plate pack is
included with Nexxus speaker stands as standard. If you have selected one of the
upgraded top plate packs, we suggest that the unused top plates be repurposed by
attaching them to the underneath of the base plates via the tube fastening bolts.
This will increase the low-down mass of the stands, reduce base plate resonance,
increased rigidity and will avoid the original top plates being misplaced should
they be required later. Atacama NeXXus series speaker stands are designed and
manufactured in the UK.
.gif)
ATACAMA NEXXUS
Pro
Colore
Nero
€. 350,00 Colore
Diamante
€. 375,00*
Stand per diffusori (max 15kg l'uno) con punte e
gel pad, riempibile con Atabites standard (max 16,7kg) per aumentare la
stabilità e la massa. Top (LxP): 130x170mm, base (LxP): 260x365mm, altezza
600mm. Top opzionali (LxP): 160x220mm, 140x210mm, 180x150mm e 190x305mm.
Versione HiFi Audio consigliata per le migliori prestazioni soniche, versione
Pro Studio consigliata per l'utilizzo professionale e l'home theater
*Top Plate 160x220mm oppure 140x210mm
+49,00 euro
The top of the range NeXXus Pro Studio version of
the Award Winning* NeXXus Series speaker stands are perfect for professional use
or for home hifi speaker support where only the best will do! Featuring twin
76.2mm (3”) tubes, they offer maximum mass loading potential for high end
professional grade studio speakers. This upgrade allows a significant increase
of mass loading and improved stability to the speaker stand design, making the
NeXXus 600 Pro Studio specification an ideal choice for the serious music lover.
As an example, by opting for the NeXXus 600 Pro Studio specification, the
maximum amount of Atabite filler has increased to 42.5kg (93.6 lbs) compared to
the NeXXus 600 Essential version, rated at 16.8Kg (37 lbs) or the NeXXus 600
HiFi Audio versions 29.65kg (65.25 lbs) per pair. Each individual stand is
equipped with twin 76.2mm tubes and the new 5mm thick laser cut “shield” design
base plate along with a 130mm wide x 170mm deep top plate as standard. If this
sized top plate is not a suitable match for the supported speakers, a choice of
*Three alternative sized top plates packs are available and can be purchased
separately if required. The increase in mass and stability also allows an
increased weight capacity to be supported on each stand of 30kg (66.12 lbs), up
from Essentials 15kg (33.06 lbs) and Hifi Audio’s 22.5kg (49.6 lbs). The spike
interface features our biggest adjustable 8mm BZP spikes. (Previous model Nexus
used 6mm spikes). Colour options- Satin Black or Diamond white. Dimensions
Standard Top plate (Width, Depth) 130mm (5.11”) x 170mm (6.69”) Base Plate (Width,
Depth) 260mm (10.2”) x 365mm (14.37”) Overall height 620mm (24.4”) (inclusive of
floor spikes) Weight capacity (per stand) 30kg (66.12 lbs) Approximate maximum
Atabite mass loading filler capacity (620mm high version) is 42.5kg (93.6 lbs)
per pair. Optional (Purchase separately) **Top plate pack dimensions (Width/Depth)
160mm x 220mm (6.29” x 8.66”) 140mm x 210mm (5.5” x 8.26”) 190mm x 305mm (7.48”
x 12”) Spike shoes- 2 x packs of Atacama HD-L spike shoes are recommended if the
stands are being placed on a delicate floor covering. Mass Loading Plate pack-
This pack is compatible with NeXXus Series. Gel Pads- NeXXus Pro Studio
Specification come with the new High Load trapezoidal gel pads. Atabite Mass
loading filler- For NeXXus 600 Enthusiast, three to four 7kg tubs of Atabites
per pair of stands will be sufficient for most applications. The exact amount to
use is room, system, and personal choice dependent. See Atabite product listing
for more details. *Note- The 130mm x 170mm top plate pack is included with
Nexxus speaker stands as standard. If you have selected one of the upgraded top
plate packs, we suggest that the unused top plates be repurposed by attached
them to the underneath of the base plates via the tube fastening bolts. This
will increase the low-down mass of the stands, reduce base plate resonance,
increased rigidity and will avoid the original top plates being misplaced should
they be required later. **The 180mm x 150mm Optional top plate pack is not
suitable for NeXXus Pro Studio as the overall combined depth of the twin
vertical tubes is deeper than the top plate. Atacama NeXXus series speaker
stands are designed and manufactured in the UK.
ATACAMA CYCLONE
5
(515 mm)
Quercia Chiara
€. 195,00 Quercia
Scura €. 220,00
ATACAMA CYCLONE
6
(615 mm)
Quercia Chiara
€. 195,00 Quercia
Scura €. 220,00
ATACAMA CYCLONE
7
(715 mm)
Quercia Chiara
€. 210,00 Quercia
Scura €. 235,00
CYCLONE Stand per diffusori con punte,
colonne verticali riempibili con Atabites standard. Top (LxP): 150x200mm, base (LxP):
240x300mm. Base in quercia chiara o in quercia scura. Altezze 515, 615 e 715mm.
Prezzo inteso la coppia.
The all new Cyclone series speaker stand features
a natural solid oak base panel which helps minimize mechanical resonance and a
50.8mm centrally located tube that can be mass loaded to help tune the supported
speakers. Available in Silk Black or Glacier White,with a choice of Natural Oak
or as a cost option Dark Oak there are three heights available; Cyclone 5
(515mm), Cyclone 6 (615mm) and Cyclone 7 (715mm). The top plate size is 150mm
wide and 200mm deep. 6mm BZP spikes and locking nuts are supplied for the base
panels to assist in isolating and levelling the stands and micro gel pads are
included for the top plate to prevent speaker slippage and to help dampen any
residual speaker cabinet resonance. These functional, tune-able and attractive
Oak based speaker stands offer fantastic value and will make a valuable
contribution to your bookshelf speakers performance All Apollo Cyclone speaker
stands are supplied in pairs and are manufactured in the UK.
ATACAMA SLX
200
(200 mm)
Colore
Nero
€. 290,00 Colore
Diamante €. 315,00
ATACAMA SLX
300
(300 mm)
Colore
Nero
€. 305,00 Colore
Diamante €. 330,00
ATACAMA SLX
400
(400 mm)
Colore
Nero
€. 320,00 Colore
Diamante €. 345,00
ATACAMA SLX
500
(500 mm)
Colore
Nero
€. 335,00 Colore
Diamante €. 360,00
ATACAMA SLX
600
(600 mm)
Colore
Nero
€. 350,00 Colore
Diamante €. 375,00
ATACAMA SLX
700
(600 mm)
Colore
Nero
€. 365,00 Colore
Diamante €. 390,00
ATACAMA SLX1000
(1000 mm)
Colore
Nero
€. 425,00 Colore
Diamante
€. 455,00
Stand per diffusori con punte e base in
carbonio spessa 5mm. Colonne verticali riempibili con Atabites standard. Top (LxP):
225x225mm, base (LxP): 305x305mm. Altezza da 200 a 1.000mm. Prezzo inteso la
coppia.
The
SLX Series is our professional range of speaker stands available in a wide range
of height options and caters for when a larger top plate is required. SLX Series
are supplied in a Satin Black paint finish with Diamond White as a cost option.
Each pair of SLX stands include new 5mm thick laser cut carbon steel base plates,
eight BZP 8mm adjustable floor spikes featuring stainless steel detailed top
caps and upgraded High Load Trapezoidal (HLT) Isolation Gel Pads for the top
plates. We recommend that each pair are mass loaded with Atabites in order to
maximize their sonic potential (see below for quantity guidance and
recommendations on the amount of mass filler to use). Floor spikes and HLT
Isolation Gel pads are included with each pair of stands, with the option of
adding Atabite mass loading filler, top spikes and spike shoes if required. As
these speaker stands use isolation spikes, two sets of four Atacama HD-S (Nickel
finish) spike shoes are recommended to protect delicate floor coverings. Single
stands can be supplied if required; please contact your local Atacama stockist
or the Atacama sales department on 01455 283251 for pricing and availability (UK
only). SLX speaker stands are designed and manufactured in the UK.
mDimensions:- Overall Height (Including HLT Gel Pads and Floor Spikes)SLX 200
235mm (9.25”) SLX 300 335mm (13.19”) SLX 400 435mm (17.12”) SLX 500 535mm
(21.06”) SLX 600 635mm (25”) SLX 700 735mm (28.9") SLX 1000 1035mm (40.7”) Top
Plate Dimensions Width 225mm (8.9”), Depth 225mm (8.9”) Base Plate Dimensions
Width 305mm (12”), Depth 305mm (12”) Weight Capacity 15KG per stand. Note-
Supported speaker width/depth dimensions should not exceed speaker stand base
plate dimensions. Atabite quantity recommendation Below are stated the
recommended number of tubes to share between each pair of speaker stands. All
vertical poles should be equally filled. Amounts are approximate and will not
necessarily completely fill the tubes. It is suggested that you experiment with
the exact amount to achieve the best sonic results for your particular system
setup as the speakers, room acoustics, cable loom, positioning of the speakers
and hifi components will determine how much Atabite filler to use to get the
best sound from your speakers. As a general rule, approximately half to two
thirds full gives the best results. If you find the speakers are lacking high
end detail and sounding dull at the lower end that usually means you have
overfilled the stands and will need to reduce the volume of Atabites in each
stand. If the speakers are new, it is suggested that the exact amount of
Atabites needed will best be determined once they are run in. Refer to your
speaker instructions or contact the supplying retailer/ manufacturer for
guidelines on running in recommendations.
SLX 200 1 Tub SLX 500 4 Tubs SLX1000 7 Tubs SLX 300 2 Tubs SLX 600 5 Tubs
SLX 400 3 Tubs SLX 700 6 Tubs
ATACAMA HMS
1.1
(500 mm)
Colore
Nero
€. 310,00 Colore
Diamante €. 335,00
ATACAMA HMS
1.1
(600 mm)
Colore
Nero
€. 325,00
ATACAMA HMS
1.1
(700 mm)
Colore
Nero
€. 340,00 Colore
Diamante €. 365,00
ATACAMA HMS
1.TS
(600 mm)
Colore
Nero
€. 370,00
ATACAMA HMS
2X
(600 mm)
Colore
Nero
€. 455,00 Colore
Diamante
€. 485,00
Stand per qualunque diffusore da supporto, grazie alla
massa maggiorata. Punte incluse.
Finiture Nero, Diamante. Prezzo inteso la coppia.
Supplied
as a pair.The Atacama HMS 2X (High Mass Stand 2X) was developed with the
co-operation and expertise of ProAc, one of Britain’s most highly respected
speaker manufacturers and features a large 200mm x 225mm top plate. Designed for
those looking for a reference quality speaker stand, the HMS 2X has a 30%
increase in mass loading capacity over our equivalent professional grade SLX
series. Once each pair is fully loaded with Atabites, the HMS 2X will give you
the ultimate platform for when needing to optimise your loudspeakers
performance.Available in Satin Black and as a cost option, Diamond White,Dimensions
Overall Height 607mm (excluding floor spikes), Top Plate Width 200mm (7.87"),
Depth 225mm (8.85"), Base Plate Width 300mm (11.8"), Depth 335mm (13.18")
Atacama recommend Atabite SMD-Z 7HD inert filler to achieve maximum sonic
performance. Up to 84KG can be used per pair. As a guide fill the tubes half to
two thirds full to achieve optimum results. Two packs of Atacama HD-L
spike shoes are recommended if the stands are to be placed on a delicate floor
covering.
ATACAMA
AUDITION 300 (335 mm)
Colore
Nero
€. 410,00 Colore
Diamante
€. 440,00
ATACAMA
AUDITION 400 (435 mm)
Colore
Nero
€. 425,00 Colore
Diamante
€. 425,00
ATACAMA
AUDITION 500 (535 mm)
Colore
Nero
€. 440,00 Colore
Diamante
€. 470,00
ATACAMA
AUDITION 600 (635 mm)
Colore
Nero
€. 455,00 Colore
Diamante
€. 485,00
ATACAMA
AUDITION 700 (735 mm)
Colore
Nero
€. 470,00 Colore
Diamante
€. 500,00
Stand per diffusori con base in carbonio spessa 5mm, punte
regolabili da 8mm. Colonne verticali riempibili con Atabites standard. Top (LxP):
360x225mm, base (LxP): 400x305mm. Altezza da 335 a 735mm, portata 20kg per
ciascuno stand. Prezzo inteso la coppia.
The
Audition Series Speaker stands have a large 360mm by 225mm laser cut top plate
and can be used with either dimension being front facing. This allows both large,
wide but shallow speakers to be supported as well as the more numerous deep
cabinet types. The Audition Series are supplied in a Satin Black paint finish
Diamond White as a cost option. Each pair of Audition stands are equipped with
new 5mm thick laser cut carbon steel base plates, eight heavy duty BZP 8mm
adjustable floor spikes featuring stainless steel detailed top caps and upgraded
High Load Trapezoidal (HLT) Isolation Gel Pads for the top plates. We recommend
that each pair are mass loaded with Atabites in order to maximize their sonic
potential (see below for quantity guidance and recommendations on the amount of
mass filler to use). Floor spikes and HLT Isolation Gel pads are included with
each pair of stands, with the option of adding Atabite mass loading filler, top
spikes and spike shoes if required. As these speaker stands use isolation spikes,
two sets of four Atacama HD-L (Nickel finish) spike shoes are recommended to
protect delicate floor coverings. Single stands can be supplied if required;
please contact your local Atacama stockist or the Atacama sales department on
01455 283251 for pricing and availability (UK only). Audition speaker stands are
designed and manufactured in the UK. These are a specialist speaker stand, so
are made to order. Allow 2-3 week manufacturing times. Dimensions: - Overall
Height (Including HLT Gel Pads and Floor Spikes) Audition 300 335mm (13.19”)
Audition 400 435mm (17.12”) Audition 500 535mm (21.06”) Audition 600 635mm (25”)
Audition 700 735mm (28.9") Top Plate Dimensions Setup 1. Width 360mm (14.17”),
Depth 225mm (8.9”) Setup 2. Width 225mm (8.9”), Depth 360mm (14.17”) Base Plate
Dimensions Setup 1. Width 400mm (15.7”), Depth 305mm (12”) Setup 2. Width 305mm
(12”), Depth 400mm (15.7”) Weight Capacity 20KG per stand. Note- Supported
speaker width/depth dimensions should not exceed speaker stand base plate
dimensions. Atabite quantity recommendation Below are stated the recommended
number of tubes to share between each pair of speaker stands. All vertical poles
should be equally filled. Amounts are approximate and will not necessarily
completely fill the tubes. It is suggested that you experiment with the exact
amount to achieve the best sonic results for your particular system setup as the
speakers, room acoustics, cable loom, positioning of the speakers and hifi
components will determine how much Atabite filler to use to get the best sound
from your speakers. As a general rule, approximately half to two thirds full
gives the best results. If you find the speakers are lacking high end detail and
sounding dull at the lower end that usually means you have overfilled the stands
and will need to reduce the volume of Atabites in each stand. If the speakers
are new, it is suggested that the exact amount of Atabites needed will best be
determined once they are run in. Refer to your speaker instructions or contact
the supplying retailer/ manufacturer for guidelines on running in
recommendations.
Bambù naturale
ATACAMA
MOSECO 5 (500 mm)
Colore
Nero
€. 230,00 Colore
Diamante
€. 245,00Colore
NL+NO €. 255,00
ATACAMA
MOSECO 6 (600 mm)
Colore
Nero
€. 230,00 Colore
Diamante
€. 245,00Colore
NL+NO
€. 255,00
ATACAMA
MOSECO 7 (700 mm)
Colore
Nero
€. 245,00 Colore
Diamante
€. 260,00Colore
NL+NO
€. 270,00
ATACAMA
MOSECO 10(1000 mm)
Colore
Nero
€. 275,00 Colore
Diamante
€. 295,00Colore
NL+NO €. 305,00
ATACAMA
MOSECO XL500
(520mm)
Colore
Nero
€. 485,00 Colore
Diamante
€. 505,00
Colore NL+NO
€. 510,00
ATACAMA
MOSECO XL 600
(620mm)
Colore
Nero
€. 485,00 Colore
Diamante
€. 505,00
Colore
NL+NO
€. 510,00
Moseco
Stand in bambù e carbonio, colonna frontale da 50mm, colonna posteriore da m28mm
(per cable management). Riempibile con Atabites (1 x Moseco 5 e 6, 2 x Moseco 7,
3 x Moseco 10). Top LxP 130x170mm, capacità 7,5kg. Punte incluse. Finiture
colonne: Nero, Diamante, oppure colonna frontale Nero Lucido con colonna
posteriore nero opaco (NL+NO). Base bambù naturale o scuro. Modello XL con due
colonne da 50mm e una da 75mm. Prezzo inteso la coppia.
Introducing the flagship of the Moseco range, the
Moseco XL speaker stands are supplied as matched pairs and feature a substantial
5mm thick, 200mm wide by 275mm deep carbon steel top plate specifically designed
to support large bookshelf style speakers. Four domed isolation gel pads are
also included with each top plate to protect and dampen the cabinet of the
supported speaker. The XL600 has a overall height of 620mm excluding floor
spikes and gel pads. For maximum stability, Moseco XL stands have been developed
around a triple carbon steel tube configuration. These tubes consist of large
twin rear 50mm diameter poles matched to a single over-sized front 75mm diameter
pole, all painted in an attractive Satin Black finish. All three tubes are
designed to accept Atabite SMD 7.5HD filler which will add mass and reduce
ringing (two packs per stand would, under most circumstances, be sufficient).Moseco
XL also features hand finished 40mm thick Bamboo base panels which, as well as
being aesthetically pleasing, has resonance dampening acoustic benefits when
compared to the more traditional metal or glass materials used in speaker stand
base plate design. To maximize the performance of the Bamboo, the three steel
tubes are located into individually recessed holes that allows improved lateral
support, so aiding rigidity and stability. Each Bamboo base panel comes complete
with four adjustable 8mm Bright Zinc Plated steel spikes with locking nuts to
help with leveling and to add an additional level of isolation ( two packs of
Atacama HD-S spike shoes can be purchased separately should you require the
stands to be positioned on a delicate floor covering). Two height options are
available; a choice of either 520mm or 620mm can be specified (excluding spikes
and isolation gel pads). The weight capacity per stand is 20KG (44lbs). For
additional stability and sound dampening, the Atacama Mass Loading Plate pack
can be used with Moseco XL. All Moseco XL Speaker Stands are manufactured in the
UK. Please Note Bamboo is a natural material, so some slight colour variance
between panels will be present and the colours will mature over time or if left
in direct sunlight. This slight colour variation will also apply if you attempt
to match a pair of Moseco speaker stands to a Atacama bamboo based equipment
support. Atacama Audio source all Bamboo used in their prod
Bambù scuro
ATACAMA
MOSECO 5 (500 mm)
Colore
Nero
€. 255,00 Colore
Diamante
€. 270,00
Colore
NL+NO
€. 280,00
ATACAMA
MOSECO 6 (600 mm)
Colore
Nero
€. 255,00 Colore
Diamante
€. 270,00
Colore NL+NO
€. 280,00
ATACAMA
MOSECO 7 ( 700 mm)
Colore
Nero
€. 270,00 Colore
Diamante €. 290,00
Colore
NL+NO €. 295,00
ATACAMA
MOSECO 10(1000 mm)
Colore
Nero
€. 305,00 Colore
Diamante
€. 320,00
Colore
NL+NO €. 330,00
ATACAMA
MOSECO XL500
(520 mm)Colore
Nero
€. 515,00 Colore
Diamante
€. 530,00
Colore
NL+NO
€. 540,00
ATACAMA
MOSECO XL 600
(620 mm)
Colore
Nero
€. 515,00 Colore
Diamante
€. 530,00
Colore
NL+NO €. 540,00
Moseco
Stand in bambù e carbonio, colonna frontale da 50mm, colonna posteriore da m28mm
(per cable management). Riempibile con Atabites (1 x Moseco 5 e 6, 2 x Moseco 7,
3 x Moseco 10). Top LxP 130x170mm, capacità 7,5kg. Punte incluse. Finiture
colonne: Nero, Diamante, oppure colonna frontale Nero Lucido con colonna
posteriore nero opaco (NL+NO). Base bambù naturale o scuro. Modello XL con due
colonne da 50mm e una da 75mm. Prezzo inteso la coppia.
Introducing the flagship of the Moseco range, the
Moseco XL speaker stands are supplied as matched pairs and feature a substantial
5mm thick, 200mm wide by 275mm deep carbon steel top plate specifically designed
to support large bookshelf style speakers. Four domed isolation gel pads are
also included with each top plate to protect and dampen the cabinet of the
supported speaker. The XL600 has a overall height of 620mm excluding floor
spikes and gel pads. For maximum stability, Moseco XL stands have been developed
around a triple carbon steel tube configuration. These tubes consist of large
twin rear 50mm diameter poles matched to a single over-sized front 75mm diameter
pole, all painted in an attractive Satin Black finish. All three tubes are
designed to accept Atabite SMD 7.5HD filler which will add mass and reduce
ringing (two packs per stand would, under most circumstances, be sufficient).Moseco
XL also features hand finished 40mm thick Bamboo base panels which, as well as
being aesthetically pleasing, has resonance dampening acoustic benefits when
compared to the more traditional metal or glass materials used in speaker stand
base plate design. To maximize the performance of the Bamboo, the three steel
tubes are located into individually recessed holes that allows improved lateral
support, so aiding rigidity and stability. Each Bamboo base panel comes complete
with four adjustable 8mm Bright Zinc Plated steel spikes with locking nuts to
help with leveling and to add an additional level of isolation ( two packs of
Atacama HD-S spike shoes can be purchased separately should you require the
stands to be positioned on a delicate floor covering). Two height options are
available; a choice of either 520mm or 620mm can be specified (excluding spikes
and isolation gel pads). The weight capacity per stand is 20KG (44lbs). For
additional stability and sound dampening, the Atacama Mass Loading Plate pack
can be used with Moseco XL. All Moseco XL Speaker Stands are manufactured in the
UK. Please Note Bamboo is a natural material, so some slight colour variance
between panels will be present and the colours will mature over time or if left
in direct sunlight. This slight colour variation will also apply if you attempt
to match a pair of Moseco speaker stands to a Atacama bamboo based equipment
support. Atacama Audio source all Bamboo used in their prod
Bambù naturale
ATACAMA
MOSECO cc01 (215 ,315,415mm)
Colore
Nero
€. 245,00 Colore
Diamante
€. 260,00
ATACAMA
MOSECO cc02 (215 ,315,415mm)
Colore
Nero
€. 260,00 Colore
Diamante
€. 275,00
ATACAMA
MOSECO cc03 (215 ,315,415mm)
Colore
Nero
€. 275,00 Colore
Diamante
€. 295,00
Moseco CC Stand per canale centrale, disponibile in tre modelli:
CC01 (top 400x180 mm), CC02 (top 475x210 mm) e CC03 (top 550x250 mm).
Disponibile in 5 altezze (215, 315, 415, 515 e 615 mm), colonne in acciaio
finitura nero o diamante. Base 600x292 mm in bambù naturale, medio o scuro.
Moseco CC02 Centre Channel speaker stand.
The Moseco CC02 has a Top Plate size of 475mm (18.7") wide, 210mm (8.3") deep.
If a smaller or larger top plate is required, please refer to the CC01 and CC03
versions.
There are five height options available ranging from 215mm to 615mm (excluding
floor spikes), so allowing you to optimize the position of your centre channel
speaker.
The 40mm thick bamboo base panel is equipped with four adjustable spikes
allowing the stand to be tilted if required. This base panel is available in a
choice of two different colours; Natural Bamboo and as a cost option, Dark
finish.
The twin vertical 50.8mm (2") steel tubes are supplied in a satin Black finish
as standard, with Diamond white as a cost option. These tubes can be filled, so
aiding stability and to improve the sonic characteristics of the speaker. One
tube of Atacama Atabites SMD-Z 7kg is enough for most height options.
Please note:-
Bamboo is a natural material, so some slight colour variance between panels will
be present and the colours will mature over time or if left in direct sunlight.
This slight colour variation will also apply if you attempt to match Moseco
speaker stands to a Atacama bamboo based equipment support. Do not attempt to
colour match with the photography; the shades will alter depending on the
lighting and underlying colour of the natural bamboo. Colours shown are a guide
only.
Atacama Audio source all Bamboo used in their products dir
Bambù scuro
ATACAMA
MOSECO cc01 (515,615 mm)
Colore
Nero
€. 275,00 Colore
Diamante
€. 295,00
ATACAMA
MOSECO cc02 (515,615 mm)
Colore
Nero
€. 290,00 Colore
Diamante
€. 310,00
ATACAMA
MOSECO cc03 (515,615 mm)
Colore
Nero
€. 310,00 Colore
Diamante
€. 325,00
Moseco CC Stand per canale centrale, disponibile in tre modelli:
CC01 (top 400x180 mm), CC02 (top 475x210 mm) e CC03 (top 550x250 mm).
Disponibile in 5 altezze (215, 315, 415, 515 e 615 mm), colonne in acciaio
finitura nero o diamante. Base 600x292 mm in bambù naturale, medio o scuro.
Moseco CC02 Centre Channel speaker stand.
The Moseco CC02 has a Top Plate size of 475mm (18.7") wide, 210mm (8.3") deep.
If a smaller or larger top plate is required, please refer to the CC01 and CC03
versions.
There are five height options available ranging from 215mm to 615mm (excluding
floor spikes), so allowing you to optimize the position of your centre channel
speaker.
The 40mm thick bamboo base panel is equipped with four adjustable spikes
allowing the stand to be tilted if required. This base panel is available in a
choice of two different colours; Natural Bamboo and as a cost option, Dark
finish.
The twin vertical 50.8mm (2") steel tubes are supplied in a satin Black finish
as standard, with Diamond white as a cost option. These tubes can be filled, so
aiding stability and to improve the sonic characteristics of the speaker. One
tube of Atacama Atabites SMD-Z 7kg is enough for most height options.
Please note:-
Bamboo is a natural material, so some slight colour variance between panels will
be present and the colours will mature over time or if left in direct sunlight.
This slight colour variation will also apply if you attempt to match Moseco
speaker stands to a Atacama bamboo based equipment support. Do not attempt to
colour match with the photography; the shades will alter depending on the
lighting and underlying colour of the natural bamboo. Colours shown are a guide
only.
Atacama Audio source all Bamboo used in their products dir
ATACAMA Monoplinth
ECO 60/65
Bambu 'Chiaro
€. 1.515,00 Bambu
'scuro
€. 1.580,00
ATACAMA Monoplinth
ECO 70/80
Bambu 'Chiaro
€. 1.820,00 Bambu
'scuro
€. 1.880,00
Monoplinth ECO
Basi per elettroniche in bambù, supporto fino a 70kg. Disponibili in
versione 60/65 (60x65mm) e 70/80 (70x80mm), nelle finiture bambù mnaturale e bambù scuro. Prezzo inteso la coppia.
These
solid carbonised bamboo modules will make the perfect accompliment to mono block
amplification, offering both support and enhanced performance. Designed
primarily to support Mono block amplifiers, Atacama Monoplinth Eco 60/65 are
supplied in pairs (singles are available upon request) and use mechanical
resonance technology developed from the multi-award winning Atacama Evoque Eco
SE series of hifi supports. Each module features V.R.D.C. (Vectored Resonance
Displacement Channels) cut into the underside of each Bamboo panel. These
channels have been designed to direct mechanical energy away from the supported
amplifier. In addition, sets of A.S.I.S.T. gaskets and isolation components
(Atacama Sonic Isolation System Technology) are built into each of the legs
which both dampen and help direct this energy away, thus allowing this
mechanical grounding to dissipate the unwanted resonance to the floor. Weight
capacity per module. 70kg. Each pair of Monoplinth modules will have a total of
16 legs, all on isolation spikes. If being placed on a delicate floor covering
four sets of Atacama HD-L Spike shoes (sold separately) should be used to
protect the floor. Monoplinths can, under specific circumstances, be stacked (additional
leg components will need to be purchased separately). Please contact your
Atacama audio stockist or the Atacama sales team (post@atacama-audio.co.uk) for
advice should you wish to use them in this configuration. Please be sure to have
the weights and dimensions of the equipment that you wish to place on the
modules. This option is available in the UK. For international availability of
the optional stacking components, contact your distributor or local Atacama
retailer.Please note: - Bamboo is a natural material so colour, texture, grain
and age will give a variable appearance to each shelf. This is normal and adds
to the intrinsic beauty of the material. Because of this, adding Monoplinths to
an existing or new Atacama bamboo rack setup, batch /colour tonal differences
will be present. If you would like to minimise this variation, where possible
order your Monoplinths and standard Atacama bamboo rack shelving at the same
time as a complete support system with enough levels to fulfil possible future
requirements. There may be some darkening of the Bamboo over time. This is
normal and part of the materials maturing process. Monoplinths are made in the
UK. The Leg tube colour is Satin Black. These modules are supplied in the
NATURAL BAMBOO FINISH. Dimensions Overall Width 600mm (23.6”) Overall Depth
650mm (25.59”) Overall Height 110mm (8.26”) Width between top caps, Inner caps
365mm (14.37”), Outer caps 500mm (19.68”) Depth between top caps Inner caps
550mm (21.65”), Outer caps 415mm (16.33”) Height Under Module 70mm (2.75”)
Thickness of Bamboo 40mm (1.57”) All Sizes are approximate.
ATACAMA EQUINOX
HIFI RS2
Base a 2 ripiani, vetri nero
piano
€. 365,00 Base
a 2 ripiani, vetri in laminato ARC
€. 440,00
ATACAMA EQUINOX
HIFI RS2
Ripiano altezza 145mm /195 mm
€. 185,00
Ripiano altezza
145mm /195 mm ARC
€. 220,00
Equinox Hi-Fi RS 2 Mobile porta
elettroniche a 2 ripiani, massimo 20kg x ripiano, massimo 5 ripiani. Ripiano (LxP):
500x500mm. Distanza ripiani: 225mm. Ingombro mobile (LxAxP): 590x370x550mm.
Disponibile con mobile nelle finiture Nero, Diamante, con vetri color nero
piano, e in laminato ARC. Ripiani aggiuntivi alti 145mm o 195mm.
Combining high performance with
practicality and good looks, the multi-award winning Equinox Hifi RS offers a
flexible approach to Hifi rack design. This upgraded RS (Revised Specification)
version of the Awarding winning Equinox Hifi support has more and bigger
advanced resonance dampening gel pads between the frame
and the glass, a 10% weight capacity improvment and a fresh contemporary update
to its appearance. All RS modules are fully compatable with previous versions of
Equinox HiFi.This Equinox has the ability to grow with your system by allowing
you to begin with this two shelf base module; you then simply add individual
single shelf modules of either 145mm or 195mm (internal height) to achieve the
amount of storage required. Each single shelf module is isolated on heavy duty
spikes to ensure optimum performance from your audio system. Equinox Hifi also
features either standard 6mm glass shelves toughened to BS 6206A and EN
12600:2002 which are decoupled from the rack framework via mini isolation gel
pads to reduce vibration affecting sensitive Hifi equipment. For maximum sound
deadening properties, ARC Glass can now be specified. Atacama Resonance Control
glass has been developed for Equinox Hifi and Equinox Celebration models is now
available as an upgrade. This specially made laminated glass has a dampening
core and is over 50% thicker than standard Equinox glass to further improve the
performance of the Equinox Hifi range of equipment supports. The high
performance ARC glass is available exclusively in Piano black colour and will
only fit Equinox Hifi and Hifi Celebration models. IMPORTANT-PLEASE NOTE- if ARC
glass is used on the lower shelf, due to the increase thickness the internal
capacity will be reduced from 200mm to 193mm
ATACAMA EQUINOX
HIFI LE
Base
a 2 ripiani, vetri nero piano
€. 395,00 Base
a 2 ripiani, vetri in laminato ARC
€. 485,00
ATACAMA EQUINOX
HIFI LE
Ripiano H 145mm /195 mm
€. 260,00
Ripiano H 145mm /195 mm ARC
€. 290,00
Equinox Hi-Fi RS Celebration LE Mobile porta
elettroniche fino a 4 ripiani aggiuntivi a scelta, kit di isolamento di XL Pro
SE, riemp. colonne in Nomafoam, massimo 25kg x ripiano, massimo 5 ripiani.
Ripiano (LxP): 500x500mm. Distanza ripiani: 220mm base, 2 ripiani aggiuntivi da
145 o 195mm. Ingombro mobile (LxP): 590x550mm. Disponibile in Nero laccato,
Nero, Diamante (vetri neri o ARC). Ripiano agg. 145mm o 195mm
Here
you can build your own 4 shelved Equinox Hifi RS Celebration rack combination (an
extra module can be added using the drop down option box if required which will
take you to the maximum of 5 levels). All choices include a two shelf base
module. Just chose your frame and glass type, the height combination of your two
additional shelf modules, whether you require standard 6mm glass or the NEW
award winning Piano Black ARC glass and if you wish to add another shelf module
(reduce the quoted available inner height by 7mm for each shelf if specifying
ARC glass) PLEASE NOTE-The Price shown is for a 2 shelf Base unit and two
additional single shelf modules with internal heights of either 145mm or
195mm.This will give you a total of 4 levels of storage. Please note that the
price shown assumes standard 6mm glass has been specified. As well as our
standard frame colours, Equinox RS Celebration can be ordered with the special
Gloss Black finish at no extra cost. Piano Black glass is standard, or as a cost
upgrade ARC Piano Black glass can then be specified.The technical upgrades over
the standard Equinox RS Hi-fi are as follows:•New aerospace grade aluminium top
and bottom isolation caps.•incorporating neoprene A.S.I.S.T. gasket technology
to improve dampening.•Redesigned top and base leg cap interface which
dramatically reduces surface area contact between each module by over 90%, thus
substantially increasing the isolation of each module.•Top and bottom caps are
now fastened together (as opposed to press fitted) which aids the rigidity of
each unit, helps transfer high frequency resonances away from supported
equipment and raises the weight capacity for each shelf from 22kg to 27.5kg.For
maximum sound deadening properties, ARC Glass can now be specified. Atacama
Resonance Control glass has been developed for Equinox Hifi RS and Equinox
Celebration RS models and is now available as an upgrade. This specially made
laminated glass has a dampening core and is over 50% thicker than standard
Equinox glass to further improve the performance of the Equinox Hifi range of
equipment supports. As this glass is 7mm thicker, please reduce the inner
storage height available by this amount when choosing the module inner storage
height requirement Equinox Hi Fi RS Celebration is made in the UK.
.jpg)
ATACAMA ERIS
5.0 HIFI
Base
Naturale
€. 245,00 Base
scuro
€. 275,00
ATACAMA ERIS
5.0 HIFI
Ripiano H 150/200 /225mm
€. 245,00
Ripiano H 150/200 /225mm
€. 275,00
Eris2 ECO 5.0 Hi Fi Mobile porta elettroniche,
max 20kg x ripiano. max 4 ripiani + base. Ripiano. (LxP): 490x500mm. altezza
base 60mm, altezza ripiani 150 / 200 / 255 mm. Colonne nero o diamante, ripiani
in bambù naturale (chiaro) o scuro. Versione CRi con angoli posteriori
ritagliati per il posizionamento ad angolo. Colonne Nero Satinato o Colonne
Bianco Diamante Versione CRi aggiungere:
-CRI +18 € a ripiano
ATACAMA Evoque
ECO 35/40
Base Naturale
€. 275,00 Base
scuro
€. 300,00
ATACAMA Evoque
ECO 35/40
Ripiano altezza 145/195 /245mm
€. 275 ,00 Ripiano
altezza 145/195 /245mm
€. 300,00
ATACAMA Evoque
ECO 60/40
Base Naturale
€. 310,00 Base
scuro
€. 335,00
ATACAMA Evoque
ECO 60/40
Ripiano altezza 145/195 /245mm
€. 310 ,00 Ripiano
altezza 145/195 /245mm
€. 335,00
ATACAMA Evoque
ECO 60/40se
Base Naturale
€. 360,00 Base
scuro
€. 385,00
ATACAMA Evoque
ECO 60/40 se
Ripiano altezza 145/195 /245mm
€. 360 ,00 Ripiano
altezza 145/195 /245mm
€. 385,00
ATACAMA Evoque
ECO 60/40 se
2
Base Naturale
€. 395,00 Base
scuro
€. 420,00
ATACAMA Evoque
ECO 60/40 se
2 Ripiano H145/195 /245mm
€. 395 ,00 Ripiano
altezza 145/195 /245mm
€. 420,00
ATACAMA Evoque
ECO 110/40 Base Naturale
€. 480,00 Base
scuro
€. 505,00
ATACAMA Evoque
ECO 110/40
Ripiano altezza 145/195 /245mm
€. 480 ,00 Ripiano
altezza 145/195 /245mm
€. 505,00
ATACAMA Evoque
ECO se 14/16
Base Naturale
€. 275,00
ATACAMA Evoque
ECO se14/16
Ripiano altezza 145/195 /245mm
€. 275,00
ATACAMA Evoque
ECO se 24/16
Base Naturale
€. 310,00
ATACAMA Evoque
ECO se24/16
Ripiano H145/195 /245mm
€. 310,00
ATACAMA Evoque
ECO se 44/16
Base Naturale
€. 480,00
ATACAMA Evoque
ECO se44/16
Ripiano altezza 145/195 /245mm €. 480,00
ATACAMA Evoque
ECO se 65/60
Base Naturale
€. 1.025,00 Base
scuro
€. 1.060,00
ATACAMA Evoque
ECO se 65/60
Ripiano H145/195 /245mm
€. 1.025,00 Ripiano
H 145/195 /245mm
€. 1.060,00
Evoque ECO Serie 40 e Serie 16 Mobile porta
eletttroniche, base più max 4 ripiani, max 30kg x rip. Vers. 35/40 rip. (LxP):
350x400mm, 60/40 rip. (LxP): 600x400mm, 110/40 rip.(LxP): 1120x400mm. Altezza
ripiani: 145, 195 o 245mm. Altezza base 75mm. Mobile in bambù, finitura naturale
(chiara) o scura.
The final cost is dependent on the number of
modules required. Select the number, internal leg height and combination of
modules and the total price will be calculated and shown in your shopping cart.
All Evoque Eco modular supports feature 40mm Carbonized Bamboo with a choice of
three interchangeable leg heights capable of supporting equipment up to 30kg (66
lbs) per level. The black powder coated high gloss legs fitted to the shelf
modules are equipped with twin A.S.I.S.T (Atacama Sonic Isolation System
Technology) dampening gaskets and carbon steel studs with aerospace grade
Aluminium grounding components matched to full adjustable nickel plated 8mm
steel spikes. These components are designed to both dampen and then allow
residual high frequency resonance reflection to be channeled away from the
supported AV components so allowing them to deliver maximum performance. PLEASE
NOTE- As well as the 145mm, 195mm and 245mm standard inner leg shelf heights, a
separate 300mm leg only accessory pack can be purchased separately. This leg
pack is interchangeable with ANY of the standard height shelf modules (it is NOT
interchangeable with a base Module). Please contact the Atacama sales desk for
more details regarding this pack. Atacama high density carbonized bamboo gives
significant major sonic qualities when compared to traditional hardwood and
veneered supports, with its unique micro growth pore structure offering both
excellent vibration absorbing and resonance controlling properties. The
production processes, layering, density and overall thickness have been
specifically chosen to give the best possible acoustic results. However, please
be aware that as bamboo is a natural material, there will be colour variations
especially if adding an extra shelf module at a later date. Each bamboo module
is selected, cut, finished and prepared by hand at the UK based Atacama factory
so giving a stylish, modern appearance. ADDITIONAL BENEFITS -Ecologically
sustainable- Being a grass, bamboo is one of the fastest growing plants on the
planet that when harvested will continue to grow allowing a new crop every 5 to
7 years. Because of this fast renewable growth, bamboo absorbs very high levels
of CO2.No pesticides, herbicides or artificial fertilizers are in the growth
cycle of the bamboo used for Atacama products. -Carbon Neutral-Because of its
fast growth rate and high CO2 absorption, when factoring in processing,
manufacturing and shipping bamboo remains a Carbon neutral material.-Animal
friendly- The species of bamboo plant harvested in the Construction of Atacama
supports is not a food source for humans or endangered animal species (Panda
friendly!).Please note: - Bamboo is a natural material so colour, texture, grain
and age may give a variable appearance to each shelf. Because of this, adding an
extra shelf at a later date will introduce a batch /colour tonal difference.
Where possible order your Evoque as a complete modular support with enough
levels to fulfil possible future requirements in order to minimize this
variation. There may be some darkening of the Bamboo over time. This is normal
and part of the materials maturing process.The colours shown in the photography
are a representation in a well-lit photo studio under artificial light. Do not
attempt to use these pictures to match with other woods and furnishings as batch
colour, shading, room lighting and grain will be different. Any number of
modules can be used providing the maximum overall height of the support does not
exceed 1255mm (50 inches). All the Bamboo used is to Atacamas own specification
and sourced directly from one specific bamboo plantation. All Evoque ECO
supports are made in the UK.
.gif)
ATACAMA APOLLO
STORM 6
Base
Naturale
€. 245,00 Base
scuro
€. 275,00
ATACAMA APOLLO
STORM 6
Ripiano H 150/200 /225mm
€. 245,00
Ripiano H 150/200 /225mm
€. 275,00
Apollo Storm 6
Mobile porta elettroniche, fino a 5 ripiani (base inclusa), max 30kg per
ripiano.
Ripiano (LxP): 510x370mm. Altezza base 60mm (con punte), altezza ripiani 135,
185 o 235mm. Finitura quercia chiara o scura. Colonne nere o bianche
The
all new, 5 star What Hifi? Sound & Vision Magazine award winning (January 2018)
British made solid Oak Apollo Storm 6 modular hifi support makes a stunning
centrepiece for displaying, supporting and isolating hifi equipment in the home.
Each shelf module is precision cut on a CNC machine to ensure consistency of fit
and performance, then hand finished by dedicated craftsmen to enhance the visual
appeal of the Natural wood. The Apollo Storm 6 is not just an attractive piece
of furniture; it has primarily been designed to maximize the performance of hifi
equipment supported upon it. With a choice of two leg colours, four storage
heights and manufactured out of warp resistant 27mm solid hardwood composite
wood for strength and resonance absorption, each of the individual modules legs
feature three additional levels of isolation. First a polymer isolation disc
separates the outer leg collar from the wood forming a barrier between each of
the wood and outer leg components. The second line of isolation is the leg spike
cap. This too is a polymer construction, so the leg outer collar is completely
isolated from residual sonic feedback present when playing music. Inside each of
the leg spike caps a press fit brass screw thread has been inserted.(brass being
chosen for its slow energy proliferation speed) with the third and final level
of isolation has been achieved with the use of fully adjustable 8mm Bright Zinc
Plated steel spikes and matching lock nuts. Please Note:- Oak is a natural
material, so block colour variation, knots and grain texture is part of the
intrinsic beauty of this hifi support. Every module is aesthetically unique and
will darken over time as part of the woods ageing process, especially if exposed
to sunlight. This difference will be enhanced should you add new extra shelving
at a later date, so where possible purchase your Apollo Storm as a complete
matched set taking into account your future storage requirements.Designed and
Manufactured in the UK.
.gif)
ATACAMA APOLLO
STORM 10 Base
Naturale
€. 245,00 Base
scuro
€. 275,00
ATACAMA APOLLO
STORM 10
Ripiano H 150/200 /225mm
€. 245,00
Ripiano H 150/200 /225mm
€. 275,00
Mobile porta elettroniche, fino a 4 ripiani (base
inclusa), max 35kg per ripiano. Ripiano (LxP):
990x450mm. Altezza base 60mm (con punte), altezza ripiani 135, 185 o 235mm.
Finitura
quercia chiara o scura. Colonne nere o bianche.
The
all new, British made solid Oak Apollo Storm 10 modular AV support makes a
stunning centrepiece for displaying and supporting audio video equipment in the
home. Each shelf module is precision cut on a CNC machine to ensure consistency
of fit and performance, then hand finished by dedicated craftsmen to enhance the
visual appeal of the Natural wood. The Apollo Storm 10 is not just an attractive
piece of furniture; it has primarily been designed to maximize the performance
of the equipment supported upon it. With a choice of two leg colours, four
storage heights and manufactured out of warp resistant 27-30mm solid hardwood
composite wood for strength and resonance absorption, each of the individual
modules legs feature three additional levels of isolation. First, a polymer
isolation disc separates the outer leg collar from the wood forming a barrier
between each of the wood and outer leg components. The second line of isolation
is the leg spike cap. This too is a polymer construction, so the leg outer
collar is completely isolated from residual sonic feedback present when playing
music. Inside each of the leg spike caps a press fit brass screw thread has been
inserted. (brass being chosen for its slow energy proliferation speed) with the
third and final level of isolation has been achieved with the use of fully
adjustable 8mm Bright Zinc Plated steel spikes and matching lock nuts. Please
Note:- Oak is a natural material, so block colour variation, knots and grain
texture is part of the intrinsic beauty of this hifi support. Every module is
aesthetically unique and will darken over time as part of the woods ageing
process, especially if exposed to sunlight. This difference will be enhanced
should you add new extra shelving at a later date, so where possible purchase
your Apollo Storm as a complete matched set taking into account your future
storage requirements. Designed and Manufactured in the UK.
.gif)
ATACAMA APOLLO
STORM AV Base
Naturale
€. 245,00 Base
scuro
€. 275,00
ATACAMA APOLLO
STORM AV
Ripiano H 150/200 /225mm
€. 245,00
Ripiano H 150/200 /225mm
€. 275,00
Mobile porta elettroniche e porta TV ideale per sistemi
audiovideo, max 35kg per ripiano.
Spazio ripiano (LXP): 910x420mm (con pannello per gestione cavi), altezza utile
335mm. Dim.
(LxAxP): 990x450x450mm (piedini inclusi).
.gif)
ATACAMA APOLLO
Vynil
Bambu 'Chiaro
€. 565,00 Bambu
'scuro
€. 615,00
Apollo Storm 6 Vinyl Storage Mobile porta dischi LP in
vinile, fino a 150 dischi di capienza. Dimensioni (LxAxP): 590x350x450mm, punte
incluse. Finitura quercia chiara o scura. Colonne nere o bianche. Combinabile
con ripiani Apollo Storm 6.
ATACAMA Atabites
SMD-7HD
€. 57,00
Atabites SMD-7HD Versione HD: massa per riempire gli stand
per diffusori. Microdischi metallici zincati, densità 2.403 kg/m2 (densità
tipica della sabbia 1.442 kg/m2), confezione da 7kg. Versione Premium in sabbia
vulcanica, confezione da 5kg.
In
order to get the best possible sound from your speaker stands, it is recommended
that the main vertical columns are partially filled with a high density inert
filler . By using Atabites you will reduce ringing and give a sonically dead
platform from which to position bookshelf style speakers. Featuring new zinc
coated steel micro-discs, the Atabite SMD-Z 7HD inert filler has a uniformed
range of particulate sizes ( 2-4mm diameter) giving consistent sonic
performance. The Zinc coating adds mass, protects the filler from both
oxidization and degradation while enhancing the visual aesthetics. We are even
known to paint them in Satin Black on one side if production time allows! (purely
aesthetic, does not make any difference to the performance, will not be seen
when the Atabites are installed into the speaker stands, but looks nice in the
tub!).
PLEASE NOTE- Atabites are supplied by weight, not volume. (7 KG tubs). Some
settling of contents may occur in transit. As a guide, each 1.8L tub contains
approximately 1,6L of Atabites. As a comparison, 1.6L of typical dry *beach sand
would weigh less than 2.5KG. Maximum approximate weight of Atabites that can be
used for each pair of Atacama speaker stands:- NeXXus 600 Esssnetial =16.8kg
Nexus 5, Moseco 5, =6.8KG, Nexus 6, Moseco 6, Duo 6, =8.4KG Nexus 7, Moseco 7,
Duo 7, =9.84KG Nexus10, Moseco 10, =14.14KG Moseco CC series, as above with
corresponding leg height. SLX200=10.64KG Audition/ SLX300=16.36KG Audition/
SLX400=22.10KG Audition/ SLX500=27.84KG Audition/ SLX600=36.6KG Audition/
SLX700=39.34KG SLX1000=56.56KG (SL series, as SLX) HMS1.1 & Moseco XL
500mm=30.8KG HMS1.1 & Moseco XL 600mm=44.53KG HMS1.1 700mm=58.2KG HMS2.1 &
HMS2X-600=85KG Apollo Cyclone 5= 6.8KG Apollo Cyclone 6= 8.4KG Apollo Cyclone 7=
9.84KG Sonic results will depend on speaker stand positioning, type of speaker,
room size, type of electronics and cabling, listening position and personal
taste. However, as a general rule filling the stands approximately half to two
thirds full generally gives the best results. NOT suitable for Aurora 6 Speaker
stands. Filler can be used with non-Atacama/Apollo speaker stands but check
suitability first with the stand manufacturer. Atabite SMD-HD Conversion Amount:
1 litre (L) of volume Equals: 4.18 kilograms (kg - kilo) in weight *Beach Sand
Conversion Amount: 1 litre (L) of volume Equals: 1.53 kilograms (kg - kilo) in
weight
ATACAMA Mass
Loading Plate
€. 67,00
Mass Loading Plate
Coppia di basi per il riempimento dei supporti
Nexus, DUO, HMS1.1, Moseco e Moseco XL.
Designed
to fit out of sight within the base plate of DUO, NeXXus, Nexus or HMS1.1
speaker stands and underneath the Bamboo base panel for the Moseco range (excluding
CC versions) ,the Mass loading Base Plate pack adds 1.5 kg to each stand
increasing the sound dampening and raising the stability of each support. Please
note- the shape of the Mass Loading Plate pack may differ from that shown in the
photography as we adapt it to fit new models of speaker stands. Made in the UK
from Carbon Steel and comes painted in Satin black.
ATACAMA MOSECO
TOP PLATE PACK
€. 49,00
Coppia di basi sovradimensionate per stand
MOSECO. Dim. 160x220x4mm.
If
you are looking to own a pair of the Award winning Atacama Moseco Series or the
new NeXXus series speaker stands but are finding that the standard 130mm x 170mm
top plates are too small for your requirements, Atacama now offer this 160mm x
220mm Optional Top Plate pack for when larger bookshelf style speakers need to
be accommodated, for example KEF LS50 , LS50 Meta, Elac Debut B5.2,Dali Spektor
2 and many others .
These precision laser cut top plates are supplied as a pair and can be
retrofitted to all Moseco/ NeXXus speaker stands. However, if being used on
Moseco 10's, then you will need to add a minimum of two tubs of Atabites (or
similar mass loading material) to the main tubes and be sure the footprint (Width/Depth
of the speaker) is less than the Bamboo base panel's dimensions in order to
maximise stability.
Painted in a tough powder coated Satin Black finish and made from quality UK
sourced 4mm carbon Steel, each pack also includes 8 (4 per top plate) Mini
Isolation Gel Pads that have been designed to help locate (reducing the chance
of speaker slippage), protect (act as a cushion between the speaker and the top
plate) and sonically dampen the supported speaker.
Note- Each pack consists of two top plates. Only one pack required per pair of
speaker stands. Useful Tip:-It is suggested that the unused top plates that came
with the speaker stands are fitted to the underneath of the base plate/ bamboo
panel. This will increase low down mass, aid stability and will avoid them being
misplaced should you wish to use these smaller top plates in the future. Made in
the UK. This top plate pack is not suitable for Moseco XL or Moseco CC
Series.
ATACAMA Top
Spikes:
€. 18,00
ATACAMA Top
Spikes carpet M6
€. 16,00
ATACAMA Top
Spikes carpet M8
€. 18,00
ATACAMA Top
Spikes carpet M8BZP
€. 21,00
ATACAMA Top
Spikes M8 OTTONE
€. 81,00
ATACAMA Top
Spikes M8 Acciaio
€. 165,00
Top Spikes: set di otto punte da posizionare tra diffusore
e stand (non adatte a Nexus). Carpet Spikes: Punte per tappeti, kit con dadi di
fissaggio, set da otto pezzi, modelli M6 e M8
ATACAMA Shoes20
€. 33,00
ATACAMA Shoes25
€. 41,00
Spike Shoes: sottopunte per pavimenti in legno o
laminato, 4 pz., 20 o 25mm, nere o argento.
ATACAMA ARC
GLASS
€. 66,00
Vetro nero piano in laminato ARC per Equinox Hi-Fi,
prezzo unitario
ATACAMA Isolation
Gel Pad
€. 26,00
Isolation Gel Pads Pad di isolamento in gel,
set di otto pezzi trasparenti o neri.
Designed to adhere to speaker stand top plates
and are made from a high performance polyurethane elastomer which, as well as
being non-slip and non scratch, gives excellent sound and vibration resistance.
Legenda istruzioni
Clicca
per qui per vedere : FOTO PRODOTTO
Clicca
per qui per vedere : ISTRUZIONI PRODOTTO
Clicca
per qui per vedere : CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO
Nota
bene *
Per ordinare o avere
gli ultimi prezzi aggiornati telefona al
0174 670100
o invia un E-mail a
info@newaudio.it
*I prezzi indicati
sono di listino ufficiale delle case produttrici ,nel
caso di diffusori si riferisce al prezzo del
singolo diffusore per offerte ed eventuali
promozioni telefonare o inviare e-mail.
*Il
presente listino sostituisce ed annulla ogni precedente. Le caratteristiche e i
prezzi indicati possono variare senza preavviso telefonare o inviare un
e-mail per ulteriori domande e conferme sui prezzi sopra riportati.
*Tutti i marchi citati nel presente listino sono di proprietà e
registrati alle rispettive Case Produttrici
*Prezzi
franco
nostro magazzino
|
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
/evoque%2035%2040%20(1).jpg){kind=small}
/evoque%2035%2040%20(3).jpg){kind=small}
/evoque%2035%2040%20(4).jpg){kind=small}
/evoque%20data%2035%2040%20(2).jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}